Airsoft replica Vorsk SMG VMP-1X gray with silencer 0.95J

Replica submachine gun (SMG = Submachine Gun) by Vorsk, equipped with a silencer and an additional magazine.

Features:

• Grey color
• Fire Modes: Safe/Semi/Auto
• Total length: 690mm
• 6.03mm inner barrel
• 134mm gun
• Weight: 2.1kg
• Velocity: 300 - 328 FPS
• Lightweight polymer frame
• Integrated top rail Fiber sights

• Dual Slot 7 Slot Side Rails
• Spring-centered stock tilt mechanism
• Folding stock
• Tailor-made compensator for the VORSK VMP suppressor
• Color matched charger cover
• Reinforced charging handle
• 48 round magazines

Included in the box:

(x1) VORSK VMP-1 SMG
(x2) STD Gas VMP Black Charger - VGS-30-01
(x1) Color matched magazine sleeve
(x1) Spare O-rings
(x1) Manual
(x1) Exploded Parts Diagram
(x1) VORSK PVC Patch (x1) VORSK VMP Suppressor

Included in the box:

(x1) VORSK VMP-1 SMG
(x2) STD Gas VMP Black Charger - VGS-30-01
(x1) Color matched magazine sleeve
(x1) Spare O-rings
(x1) Manual
(x1) Exploded Parts Diagram
(x1) VORSK PVC Patch (x1) VORSK VMP Suppressor

The VORSK VMP-1 is a lightweight, all-polymer, gas-operated Airsoft submachine gun ideal for CQB terrain

VORSK's mission is to provide Gas-Blow-Back excellence to the Airsoft field. Building on their vast selection of gas powered handguns, the VMP-1 is their first foray into the world of submachine guns. Announced at IWA 2023 and hitting stores this summer, the VMP has garnered a lot of attention due to its compact and lightweight design, features and, of course, excellent GBB performance.

Ergonomic, Compact & Lightweight

Constructed from a durable, lightweight polymer, the VMP-1 is the #1 asset in CQB environments. With the stock buried in your shoulder and your hands positioned towards the front of the replica, you'll enjoy a wide yet controlled "sweep" angle, perfect for transitioning around obstacles and room clearances. These angle transitions are further enhanced by the 15° tilt mechanism installed inside the stock. This spring-centered tilt allows you to tilt your body around a corner while holding the VMP-1 upright, reducing the risk of side-sweep BBs caused by the jump curve not parallel to the ground. The stock is collapsible along the right side of the VMP-1, just lift the locking mechanism and rotate it into position. The pistol grip features molded stippling for a secure hold. The green fiber sights are neatly stored in the flat 20mm accessory rail. Although it's difficult to get your line of sight behind when used with the stock, the fiber-illuminated sights allow for quick and instinctive parallax aiming for quick target acquisition. The collapsible stock is integrated into a slot suitable for M4 tubes allowing you to retrofit your VMP-1 with an M4 stock of your choice. The VMP-1 is so light and compact that you can play it in "Akimbo".

The perfect back-up

Built for CQB terrain, the VMP-1 can adapt to all types of terrain. Light and compact, it can become a Back up of choice, especially for sniper/DMR players. Perfectly adapted for close combat, these performances allow it to adapt to all types of terrain. Indeed the VMP-1 is able to reach targets over 30 meters away with precision and a stable flight path. Its exceptionally high rate of fire.

48R Full-Auto Gas-Blow-Back Fun

The VMP-1 is an Airsoft submachine gun with different firing modes. Firing controls are all at your fingertips with the bolt release, magazine release and fire selector a finger or thumb away from your standard "on the trigger" position. The safety is controlled by a trigger safety which requires you to intentionally pull the full trigger before allowing the VMP to fire. Gas powered, VORSK recommends its own GBB Fuel, V6 and V8 variants for the VMP-1, along with any suitable premium Airsoft Gas. You can expect to get at least two (potentially three) magazines for every gas refill. Additional chargers are available separately, remember to purchase your matching color charger covers to complete the look. To adjust the hop-up, the VMP-1 comes with an adjustment key.

Designed for accessories

You will rarely see a naked VMP-1 on airsoft fields. With a picatinny top rail, underbarrel rail, dual slot side rails, M4 stock slot and of course the optional "Can" suppressor, the VMP-1. Recommended spare accessories include Foregrip, Lasers/Torches, Optic Riser + RDS/Holo Sight. Barrel attachments are limited when the supplied Flash Hider is fitted as it was designed specifically for the "oversized" suppressor supplied with the "X" variant (also available separately). If you wish to install your own Flash Hiders, Suppressors or Tracer Units, simply remove the Flash Hider via its grub screws and replace it with any 14mm CCW airsoft gun attachment.