Acetech AuraMist Tracer

Acetech develops electronic equipment for airsoft, including tracer units for tracer BBs. The Bifrost combines this function with a light simulation of the muzzle flash, with several configurable effects and colors.

The Acetech AuraMist Tracer combines a tracer function with misting technology that uses pure water to create a visual flame effect at the muzzle of the replica. Compatible with green and red tracer BBs , as well as standard BBs depending on the mode used, it supports a rate of fire up to 35 RPS. Its reservoir can also operate autonomously for 5 to 10 minutes, while an automatic drying mode completes a cycle of approximately 30 seconds after use. The USB-C rechargeable Li-ion battery offers up to 20,000 activations and features automatic standby after 5 minutes. At 140 mm long and weighing 195 g, the Acetech AuraMist offers a unique approach to light and atmospheric effects in airsoft.

• Brand: Acetech
• Model: AuraMist
• Type: Airsoft marker with misting system
• Liquid used: pure water
• Compatible ball bearings: standard, green tracer, and red tracer.
• Supported cadence: up to 35 RPS
• Autonomy of the standalone mist mode: 5 to 10 minutes
• Drying mode: cycle of approximately 30 seconds
• Battery: Li-ion
• Charging: USB-C
• Advertised battery life: up to 20,000 activations
• Automatic sleep mode: after 5 minutes
• Dimensions: Ø 37.6 x 140 mm
• Weight: 195 g
• Certifications: FCC, CE, RoHS
• Contents: AuraMist x1, needle-filling bottles x2, user manual x1

A mist of water to enhance the flame effect

The Acetech AuraMist differs from a classic airsoft marker by integrating a misting system. This system uses pure water to generate a fine mist at the unit's outlet. Combined with the device's lighting, this produces a more three-dimensional flame effect than a simple flash.

Tracer and misting combined in a single unit

The system allows for combining several effects depending on the desired configuration. The tracer function is compatible with green and red tracer balls, while the device also accepts standard balls for effects that don't require projectile illumination. This architecture allows for transitioning from a classic tracer effect to effects combining light and fog.

Standalone mist mode lasting 5 to 10 minutes

The misting function can operate independently for approximately 5 to 10 minutes . This feature allows mist generation to be used independently of the firing cycle. Refilling is done with pure water using the needle-tip bottles provided in the packaging.

Automatic drying mode in 30 seconds

After using the mist function, the system has a drying mode that lasts approximately 30 seconds. Its purpose is to dry the system after use. This function distinguishes AuraMist from solutions based on oil-based fluids and simplifies the management of the misting system.

Compatible with red and green tracer balls

The unit supports both green and red tracer balls. This dual compatibility allows you to adapt the consumable to the desired effect. Standard balls are also supported when the function being used does not rely on their illumination.

Up to 35 shots per second

The system is advertised as compatible with a maximum rate of fire of 35 RPS , or 35 shots per second. This data allows for a direct comparison of the tracer's capabilities with the rate of fire of an airsoft replica and determines whether the latter remains within the range supported by the electronics.

Li-ion battery and USB-C charging

Power is supplied by a rechargeable Li-ion battery via USB-C . Acetech claims up to 20,000 activations per charge. An automatic sleep mode also activates after 5 minutes of inactivity to limit power consumption when the accessory is not in use.

Format: 140 mm and weight: 195 g

With a length of 140 mm , a diameter of 37.6 mm, and a claimed weight of 195 g, the AuraMist is larger than a traditional mini-plotter. This increased size is primarily due to the integration of the misting system, its reservoir, and the associated electronics.

A system that can be easily recharged with pure water

The manufacturer specifies the use of pure water to power the mist function. Two needle-filling bottles are included with the product to facilitate refilling the reservoir. This design eliminates the need for a specific oily liquid to produce the visual effect.

FAQ